Accidents can happen in the blink of an eye. Whether you are at work, home or your showroom. Fiberglass is a plastic reinforced glass that is used in many items including furniture, decoration pieces and auto-mobiles. You deal with fiberglass daily. If by chance, an accident happens, this fine-glass can pierce into your skin, giving a sensation of itching and irritation, which gets worse after every passing minute. In this article, we will tell you how to get fiberglass out of skin.
Table of Contents
How to get Fiberglass Out of Skin?
You know the famous saying “Prevention is better than cure”.Our friendly advice to you is to take care of your self. If you are doing work that involves fiberglass, apply baby powder or any skin powder over the exposed parts of your body. Experts say that putting powder covers pores and prevents the glass from penetrating your skin.
Analyse your skin:
When the pieces are pulled out from your skin, analyze your skin carefully. The fragments in your skin can cause inflammation. The inflammation will lead skin colour to redness along with itching and a small bruise. These things will heal with time. If you are still feeling uncomfortable, then some soothing creams or substances like Petroleum jelly can soothe the irritated skin. Most of the time, these bruises are not dangerous and quickly heal with time.
This Article does not consider to be a substitute for professional medical help.
If you think that any piece of fiberglass is left in your skin and the redness or swelling is getting worse, then you should consult your physician or healthcare professional Immediately.
What is the best way to get Fiberglass out of your skin?
There are three ways we discuss through which you can get fiberglass out of the skin.
1# Remove FiberGlass From Skin Using Tape
The most advisable method is tape. A tape which is not easily breakable and has a lot of glue for sticking is perfect for this job. Tapes like duct tape or electrical tape are ideal for this job.
1)Cut a piece of tape.
2) Fold it back on itself.
3) Put tape over for several minutes so, the splinters stick to it effectively.
4) Now, remove the tape in a smooth motion. Do not pull the tape harshly it can pull out or rip your skin, or create blisters. The splinters will penetrate more into the skin, making it more difficult and painful to remove.
5) Wash your hand with soap when the glass is gone. Don’t rub the bruised area harshly. Gently tap it after washing and put some ointment to avoid any infection.
Tip: Because pieces of fiberglass are very fine, use a torch or magnifying glass to check for splinters in skin.
2# Remove FiberGlass From Skin With Cold Water
The pieces are stuck into your pores. If they remained open, they could penetrate your skin more. Closing your pores is the key to stop any further damage. Placing your hand under cold water will close your pores.
1) Place your hand under the tap.
2) Gently wash your hand. Soap will help the pieces to slide off.
Tip: Never rub your hands or the bruise harshly, or the pieces will penetrate into the skin.
2# Remove FiberGlass From Skin With Tweezers
After washing or the tape method, if you still feel something in your skin, then a tweezer is your best friend. Use light or magnifying glass to see the leftover pieces in your skin and pluck them off using a tweezer. For the final touches, you always needs a tweezer.
- Use a sharp tip tweezer.
- Clean the tweezer with alcohol or disinfectant before using it over your skin.
- Try to grasp the pieces efficiently; otherwise, they will go deeper into the skin.
- Be patient.
The splinters can be removed from the skin by using tape, washing with cold water, or by using tweezers. Still, be careful when you are doing work that involves fiberglass as the process of removing it from the skin is exceptionally irritating and causes bruises and itching on your skin. If the glass penetrates deeply into the skin, it can cause skin infection. Prevention and cautious behaviour while dealing with fiberglass will keep you safe.